中文Oxygen Mask
Packing: 100sets/carton
Carton size: 49x38x32 cm
This product with oxygen system connection, provide oxygen for clinical patients to use.
1. Ordinary type: MAXL, MAL, MAM, MAS.
2. Oxygen bag type: MBXL, MBL, MBM, MBS.
3. Adjustable type: MEXL, MEL, MEM, MES.
4. Atomization type: MFXL, MFL, MFM, MFS.
Normal oxygen mask consists of mask interface general answer the oxygen tube, oxygen bag type oxygen mask is composed of oxygen mask interface gm after oxygen therapy bag, adjustable oxygen mask by mask interface controller by oxygen therapy oxygen concentration and wet bottle (optional), type of wetting oxygen mask by mask interface gm after oxygen therapy of wetting bottle (tide) bottle of oxygen mask mask oxygen therapy general answer made products sterile medical polyvinyl chloride (PVC) material, if using ethylene oxide sterilization, the factory with ethylene oxide residues is not more than 4 mg.
This product is used by doctors according to the requirements of clinical operation. Specific operation method:
1) Open the package and take out the oxygen mask.
2) Plug the mask oxygen input connector into the outer conical connector on the reduced pressure oxygen source to ensure the connection is firm.
3) Buckle the oxygen mask on the patient's nose and mouth, adjust the length of elastic band (webbing) according to the size of the patient's head, adjust the aluminum card to ensure that the edge of the oxygen mask and the patient's nose and mouth part of the facial skin contact part does not leak air; If oxygen bag type or humidified type is used, one end of oxygen bag or humidified bottle can be connected with one end of oxygen tube (universal connection).
4) The adjustable oxygen mask shall adjust the oxygen flow according to the need of oxygen transport, and turn the oxygen concentration adjustment device to adjust the oxygen concentration at the required oxygen concentration scale. The arrow of the regulator shall be aligned with the oxygen concentration scale. High oxygen concentrations were 35%, 40%, and 50%.
1) Patients with severe hemoptysis or respiratory tract obstruction are prohibited.
2) Disabled due to systemic disease.
1) Patients with severe hemoptysis or respiratory tract obstruction are prohibited.
2) Disabled due to systemic disease.
Precaution
1. Please check before use. If single (packed) product is found to have the following conditions, it is prohibited to use:
a) Expiry date of sterilization.
b) The single package of the product is damaged or has foreign matter.
2. During use, check whether the origin gas is sufficient and whether the patient is breathing smoothly. Do not fold the trachea.
3. This product is for disposable use, operated by medical personnel, and destroyed after use.
4. In the process of use, oxygen mask should be timely monitored for its smoothness and non-leakage. In case of any accident, it should be stopped immediately and properly handled by medical staff.
5. This product is ethylene oxide sterilization, sterilization period of 5 years.
Storage
The packaged Oxygen Masks should be stored in a clean place, the relative humidity is not more than 80%, the temperature should not higher than 40℃, without corrosive gas and good ventilation.
Date of manufacture: See inner packing label
Expiry date: See inner packing label
[Registered person]
Manufacturer: HAIYAN KANGYUAN MEDICAL INSTRUMENT CO., LTD
